EpoxybondPool Putty by Atlas
Pool putty / Sizes / 14 oz 2-Part Set

Epoxybond Pool Putty 2-Part Set, 14 oz

Step treads, spa floors, spalled patches bigger than your hand. Two cartridges, cut equal lengths from each.

  • 11.7 cu in of mixed putty
  • 2 hours at 70F to set
  • Cures under water
$20.49

Prices come from the listing and move without warning. What you see when you land there is what counts.

Epoxybond Pool Putty 2-Part Set, 14 oz

What the listing says

Repairs this size covers

Worn patch on a step or the spa floor takes roughly 6 cubic inches, so one 14 oz leaves 5.70 spare.

Spalled area larger than your hand takes roughly 10 cubic inches, so one 14 oz leaves 1.70 spare.

Those volumes assume the crack has been opened to the eighth of an inch the data sheet calls for. Measure yours and run it through the putty calculator if the repair is long.

Full specification

Pack size14 oz
Yield of mixed putty11.7 cubic inches
Set time at 70 °F2 hours
Compressive strength8,000 psi
Bond strength to concrete400 psi
Tensile strength1,600 psi
Minimum application thickness1/8 inch
Density130 lb per cubic foot
Service temperature150 °F continuous, 200 °F intermittent
Thermal expansion3.35 × 10⁻⁵ in/in/°F
Shelf life12 months
Cured colorWhite or Black
Structural useNo. Not intended for structural applications.
UPC685984946157
Model350
Part number530318

The putty in use

Epoxybond Pool Putty 2-Part Set, 14 oz in use
Epoxybond Pool Putty 2-Part Set, 14 oz in use
Epoxybond Pool Putty 2-Part Set, 14 oz in use

The other sizes